Smart Automation: Paving the Way to Success

Pioneering Industrial Advancement with Intelligent Solutions

Frequently Asked Questions

Can improper wiring of multi-stage magnetizers affect equipment operation? A complete guide to proper operation!
November 21, 2025 2166
Improper wiring of JIUJU multi-stage magnetizers can easily cause coil damage, short circuits, and other faults, affecting production efficiency. This article provides a detailed explanation of the impacts of incorrect wiring and outlines standardized procedures to ensure equipment stability and optimal magnetization performance.
View Full Version
Are traditional magnetizers complicated to operate and inefficient? Can this equipment achieve high-efficiency magnetization?
November 20, 2025 2170
The JIUJU magnetizer addresses the challenges of complex operation and low efficiency in conventional equipment. Centered on scientific structural design, transformer step-up, and pulse phase-shifting control technology, and equipped with a one-button start function, it supports synchronous magnetization of multiple magnetic rings. The system is compatible with various permanent magnet specifications, allowing precise control of magnetic field strength. By simplifying operational procedures, it significantly improves production efficiency, serving applications in motor manufacturing, electronic devices, and new energy industries…
View Full Version
How to ensure high performance of electronic magnetizers while controlling costs?
November 19, 2025 2029
As the core equipment of electronic manufacturing, JiuJu electronic magnetizer relies on advanced technologies such as transformer boost phase control, with high-purity oxygen-free copper coils and special spiral nesting structure, combined with intelligent operating system, to shorten the magnetization time, reduce energy consumption and maintenance costs, while ensuring the accuracy, stability and consistency of the magnetization of the magnet. It not only meets the high requirements of high-end manufacturing industry on equipment performance, but also...
View Full Version
How can a motor magnetizer achieve high-intensity magnetization within 1 minute?
November 15, 2025 2293
Relying on the magnetizing technology, high purity oxygen-free copper coil design, intelligent control and dual heat dissipation system, JUJI Motor Magnetizer can accurately match the parameters to the characteristics of different magnet materials, and complete the high-intensity magnetization within 1 minute. The equipment takes into account the magnetization efficiency and stability, and is suitable for small precision motor magnets to large industrial magnetic assemblies, meeting the stringent demands of industrial mass production for efficient magnetization, and providing high performance magnetization for motors....
View Full Version
Why is high-speed, high-precision assembly of multi-pole magnets a critical challenge for mass production of new energy motors?
November 14, 2025 2214
JIUJU addresses this core challenge in new energy motor mass production through a ‘pre-positioning protrusion + arc fitting’ structural design and a ‘zoned magnetization + laser marking’ process. This reduces magnet assembly time from 8 seconds to 2 seconds and lowers polarity misalignment rates to below 0.1%. The system supports flexible adjustment from 8 to 24 poles, with model changeover requiring only 5 minutes, perfectly balancing high-speed assembly with high-precision performance…
View Full Version
Core Considerations for Selecting Magnetization Equipment: Six Key Technical Indicators to Monitor
November 12, 2025 2242
In manufacturing scenarios that rely on magnetic steel, such as motors and speakers, the technical specifications of magnetization equipment directly impact magnet performance and product yield. This article analyzes six key indicators, including magnetization uniformity and magnetic field strength range, to help you make precise equipment selection and improve production efficiency.
View Full Version
Struggling with low output quality and high energy costs? High-power magnetization equipment delivers a complete one-stop solution.
November 12, 2025 2133
JIUJU high-power magnetization equipment addresses key pain points in permanent magnet manufacturing. With patented multi-pole magnetization heads and energy recovery technology, it achieves over 99% yield, reduces energy consumption by 60%, and reaches a daily production capacity of 5,000+ units. The system is compatible with new energy vehicle and wind power magnet production, providing a fully automated, intelligent magnetization solution for the entire process.”
View Full Version
High precision requirements for servo motor magnetization? How specialized equipment adapts
November 12, 2025 2312
JIUJU magnetization equipment focuses on the high-precision magnetization needs of servo motors. Leveraging three core technologies, including precise magnetic control, it addresses industry challenges. Through nano-level processing and AI visual calibration, it achieves magnetic flux variation of ±0.2% and pole pitch deviation ≤0.006 mm. Adaptable to multiple scenarios, it helps achieve a magnetization pass rate of 99.5%, making it a key piece of equipment for ensuring servo motor performance compliance.
View Full Version
Key to Improving Energy Efficiency in Compressor Motor Magnetization: How Does the ‘Internal Magnetization’ Process Work?
October 21, 2025 2932
In industrial production, compressor motors are core equipment for maintaining refrigeration and pneumatic system operations. However, after long-term operation, they are prone to ‘demagnetization’ due to high temperatures and vibration — the magnetism of the internal motor magnets weakens, leading not only to increased energy consumption but also to frequent start-stop cycles, elevated noise, and other issues. The JIUJU compressor motor magnetization technology enhances energy efficiency by…
View Full Version
Magnetization of Air Conditioner Compressor Rotors: Five Common User Questions and Expert Answers
October 21, 2025 2665
The air conditioner compressor, as the ‘heart’ of the AC system, relies on the magnetic performance of its rotor to directly impact operational efficiency and stability. The JIUJU air conditioner compressor rotor magnetization equipment is one of the key devices ensuring optimal rotor magnetic performance. In practice, users often have various questions about this equipment. Today, we provide educational answers to five of the most common questions.
View Full Version

Smart Automation: Paving the Way to Success

Frequently Asked Questions

Can improper wiring of multi-stage magnetizers affect equipment operation? A complete guide to proper operation!

Are traditional magnetizers complicated to operate and inefficient? Can this equipment achieve high-efficiency magnetization?

How to ensure high performance of electronic magnetizers while controlling costs?

How can a motor magnetizer achieve high-intensity magnetization within 1 minute?

Why is high-speed, high-precision assembly of multi-pole magnets a critical challenge for mass production of new energy motors?

Core Considerations for Selecting Magnetization Equipment: Six Key Technical Indicators to Monitor

Struggling with low output quality and high energy costs? High-power magnetization equipment delivers a complete one-stop solution.

High precision requirements for servo motor magnetization? How specialized equipment adapts

Key to Improving Energy Efficiency in Compressor Motor Magnetization: How Does the ‘Internal Magnetization’ Process Work?

Magnetization of Air Conditioner Compressor Rotors: Five Common User Questions and Expert Answers

Search

Social Media

About Us

Industry Magnetization Solutions

Magnetization Products

Contact Us